| Model NO. |
HQ800 |
| Swing over bed |
φ420mm |
| Distance between centers |
800mm |
| Max. longitudinal travel |
740mm |
| Max. cross travel |
200mm |
| Taper of spindle |
M.T.4 |
| Spindle hole |
φ28mm |
| Step of spindle speed |
7 |
| Range of spindle speed |
160-1360r.p.m |
| Barrel travel |
70mm |
| Taper of center |
M.T.3 |
| Metric thread range |
0.2-6mm |
| Inch thread range |
4-120T.P.I |
| Longitudinal range of automatic feeding |
0.05-0.35mm/0.002-0.014＂ |
| Cross range of automatic feeding |
0.05-0.35mm/0.002-0.014＂ |
| Max. drilling capacity |
φ22mm |
| Worktable size (L*W) |
475×160mm² |
| Max. end mill |
φ28mm |
| Max. face mill |
φ80mm |
| Max Distance between spindle center and column |
285mm |
| Max Distance between spindle nose and worktable |
306mm |
| Spindle travel |
110mm |
| Spindle taper |
M.T.3 |
| Step of spindle speed |
16 |
| Range of spindle speed |
120-3000r.p.m |
| Swivel angle of headstock |
±180° |
| Main Motor power/Drill and mill mait motor |
0.55Kw/0.55Kw |
| Voltage/Frequency |
As customers’ requirement |
| Motor speed |
1400 r.p.m |
| Packing size |
1430×580×1100mm |
| N.W /G.W |
275kgs/325kgs |
| Loading amount |
26pcs / 1 X 20’container |
